Craftsman Toolbox free tools

Tank volume calculator

Work out how much an oil tank, rainwater tank, buffer tank or water butt holds, and how many litres are in it right now from the level.

...

How it works

Rectangular: volume = length x width x height. Upright cylinder: volume = pi x r² x height, and the filled part is pi x r² x fill height.

Lying cylinder: the filled part is a circular segment times the length. Segment area = r² x acos((r - h) / r) - (r - h) x √(2 x r x h - h²), where h is the fill height and r the radius. It is not linear: a lying tank filled to half its diameter is half full, but a quarter of the height is only about 20 %.

Use inside measurements. 1 m³ = 1,000 litres. Dipstick readings in a lying tank are converted exactly with the segment formula.

Results are estimates for planning. Check product data sheets, local building rules and an engineer's calculations where required.

Frequently asked questions

How do I measure the oil in a lying tank?

Measure the inside diameter and length, dip a stick to the bottom to read the fill height, and choose lying cylinder. The calculator converts the height to litres.

How many litres is 1 m³?

1 cubic metre is exactly 1,000 litres. A tank of 1 x 1 x 1 m holds 1,000 litres.

Why is my tank's label different from the result?

Labels usually give nominal volume, while the real usable volume is a little less because of the outlet height and space at the top.

More tools in plumbing and heating

All tools (64) →