Craftsman Toolbox free tools

Flow rate calculator

Measure the flow from a tap, shower or pump with a bucket and a stopwatch, or work it out from the pipe size, and see how long a tank takes to fill.

...

How it works

Bucket test: flow (l/min) = litres / seconds x 60. Fill a bucket of known size with the tap fully open and time it. A 10 litre bucket in 30 seconds is 20 l/min.

From the pipe: flow = area x velocity = pi x (d / 2)² x v. With d in mm and v in m/s, l/min = 0.0471 x d² x v. A 20 mm bore at 1.5 m/s gives about 28 l/min.

Fill time = tank volume / flow. Typical values: a kitchen tap 6 to 12 l/min, a shower 8 to 15 l/min, a garden hose 15 to 25 l/min.

Results are estimates for planning. Check product data sheets, local building rules and an engineer's calculations where required.

Frequently asked questions

How do I measure water flow without a meter?

Use the bucket test: time how long it takes to fill a bucket or jug of known volume, then divide litres by seconds and multiply by 60.

What is a good shower flow?

A comfortable shower is 8 to 12 l/min. Water-saving heads use 6 to 8 l/min, while rain showers can use 15 l/min or more.

Why is my flow low?

Common causes are a blocked aerator or filter, a partly closed stop valve, low mains pressure, scale in old pipes or a too-small pipe for a long run.

More tools in plumbing and heating

All tools (64) →