Craftsman Toolbox free tools

Pipe volume calculator

Choose a common pipe size or enter the inner diameter, add the length, and see how many litres the pipe holds and how much glycol to add.

...

How it works

Volume = pi x (inner diameter / 2)² x length. With the diameter in mm and the length in metres, litres = 3.1416 x (d / 2)² x L / 1000. One litre of water weighs about 1 kg.

Always use the inner diameter. A 22 x 1 mm copper pipe has 20 mm inside and holds about 0.31 litres per metre; a 20 x 2 mm PEX pipe has 16 mm inside and holds 0.20 litres per metre.

For a heating, solar or heat pump circuit, add the volume of boilers, radiators, coils and buffer tanks to the pipe volume. Glycol is mixed as a percentage of the total volume, typically 30 to 40 % for frost protection down to about minus 15 to minus 25 °C (check the product sheet).

Results are estimates for planning. Check product data sheets, local building rules and an engineer's calculations where required.

Frequently asked questions

How much water is in a metre of pipe?

About 0.13 l for 15 x 1 copper, 0.20 l for 18 x 1 copper or 20 x 2 PEX, 0.31 l for 22 x 1 copper and 0.51 l for 28 x 1.2 copper.

How much glycol does my system need?

Find the total system volume (pipes plus radiators, coils and tanks) and multiply by the concentration, for example 100 l x 35 % = 35 l of glycol concentrate.

Why does the volume matter when flushing?

To flush a pipe properly you need to replace the water several times. Knowing the litres tells you how long to run the tap at a given flow.

More tools in plumbing and heating

All tools (64) →