Wallpaper calculator
Enter the total length of the walls, the room height, the roll size and the pattern repeat to see how many strips you get per roll and how many rolls to buy.
How it works
Strips needed = wall length / roll width, rounded up. Each strip is cut to the wall height plus the pattern repeat plus 10 cm for trimming at the top and bottom.
Strips per roll = roll length / strip length, rounded down, because offcuts are rarely long enough for a full strip. Rolls = strips needed / strips per roll, rounded up. A standard European roll is 0.53 x 10.05 m.
We do not subtract doors and windows: the short strips above and below them still use roll length. Only subtract very wide openings such as patio doors. Paste: about one packet for 5 standard rolls; check the packet.
Results are estimates for planning. Check product data sheets, local building rules and an engineer's calculations where required.
Frequently asked questions
What is pattern repeat?
The distance in cm before the pattern repeats vertically. It is printed on the label. Plain papers and random patterns have 0 cm repeat, large motifs 50 to 64 cm.
Should I buy an extra roll?
Yes, buy one extra roll and make sure all rolls have the same batch number. Colours can differ slightly between batches.
Do I need special paste for non-woven wallpaper?
Non-woven wallpaper is pasted on the wall, not on the paper, with paste made for non-woven. Use the type stated on the roll label.
More tools in painting, tiles and floors
๐Room area calculatorMeasure each room once and get every area you need for a quote: floor, walls minus doors and windows, ceiling, skirting length and volume.๐ฒTile calculatorEnter the area and the tile size, pick the laying pattern and get the number of tiles and boxes plus how much tile adhesive and grout to buy.๐ชตFlooring calculatorEnter the room size and the pack coverage printed on the box and get the number of packs, the underlay and the metres of skirting you need.๐จPaint calculatorEnter the room size or the wall area, the number of doors and windows and the coverage from the tin, and get the litres and tins you need.๐Skirting board calculatorEnter the room perimeter, door openings and board length to get the number of skirting boards, the corner cuts and the nails or glue to fix them.๐ชฃSelf-levelling screed calculatorEnter the floor area and the average layer thickness, choose the product type and get the kilos and bags of self-levelling compound, the primer and the mixing water.๐งดSealant calculatorEnter the joint length, width and depth and see how much silicone or acrylic sealant you need and how many cartridges to buy.๐งฑPlaster and filler calculatorEnter the wall area and the thickness of the layer, choose plaster or filler and get the kilos and bags or buckets to buy.๐Mitre angle calculatorGet the mitre saw setting for frames and polygons, for skirting in any wall corner, and the compound mitre and bevel for crown moulding cut flat on the saw.๐ Roof tile calculatorEnter the roof area or the eaves length and rafter length, choose the tile type and get the number of tiles, metres of battens and ridge tiles.๐ข๏ธDecking oil calculatorEnter the deck area, the number of coats and the coverage from the can and get the litres of decking oil and how many cans to buy.
All tools (64) โ