Craftsman Toolbox free tools

Mitre angle calculator

Get the mitre saw setting for frames and polygons, for skirting in any wall corner, and the compound mitre and bevel for crown moulding cut flat on the saw.

...

How it works

Polygon or frame: each piece is cut at 180 / n degrees, where n is the number of sides. A square frame is 45 degrees, a hexagon 30 and an octagon 22.5. The inside corner of the polygon is 180 minus 360 / n.

Wall corner: for flat trim such as skirting the mitre setting is (180 minus corner angle) / 2. A normal 90 degree corner gives 45 degrees, a 135 degree bay corner gives 22.5. Measure the corner with an angle finder, walls are rarely exact.

Crown moulding laid flat on the saw needs a compound cut. With spring angle S (angle between the back of the moulding and the wall) and corner angle C: mitre = atan(sin S / tan(C/2)) and bevel = asin(cos S x cos(C/2)). For 38 degree crown in a 90 degree corner this gives 31.6 and 33.9 degrees.

Results are estimates for planning. Check product data sheets, local building rules and an engineer's calculations where required.

Frequently asked questions

What angle do I cut for an octagon?

22.5 degrees on each end of all eight pieces. For a hexagon 30 degrees and for a triangle 60 degrees.

What is the spring angle of crown moulding?

The angle the moulding sits at against the wall. Most common is 38 degrees (sold as 52/38), then 45/45. Hold the moulding in a carpenters square to check it.

My corner is not 90 degrees. What now?

Measure it with a digital or sliding angle finder and enter the real angle. Halving it is the key: a 92 degree corner needs 44 degree mitres for flat trim.

More tools in painting, tiles and floors

๐Ÿ“Room area calculatorMeasure each room once and get every area you need for a quote: floor, walls minus doors and windows, ceiling, skirting length and volume.๐Ÿ”ฒTile calculatorEnter the area and the tile size, pick the laying pattern and get the number of tiles and boxes plus how much tile adhesive and grout to buy.๐ŸชตFlooring calculatorEnter the room size and the pack coverage printed on the box and get the number of packs, the underlay and the metres of skirting you need.๐ŸŽจPaint calculatorEnter the room size or the wall area, the number of doors and windows and the coverage from the tin, and get the litres and tins you need.๐ŸงปWallpaper calculatorEnter the total length of the walls, the room height, the roll size and the pattern repeat to see how many strips you get per roll and how many rolls to buy.๐Ÿ“Skirting board calculatorEnter the room perimeter, door openings and board length to get the number of skirting boards, the corner cuts and the nails or glue to fix them.๐ŸชฃSelf-levelling screed calculatorEnter the floor area and the average layer thickness, choose the product type and get the kilos and bags of self-levelling compound, the primer and the mixing water.๐ŸงดSealant calculatorEnter the joint length, width and depth and see how much silicone or acrylic sealant you need and how many cartridges to buy.๐ŸงฑPlaster and filler calculatorEnter the wall area and the thickness of the layer, choose plaster or filler and get the kilos and bags or buckets to buy.๐Ÿ Roof tile calculatorEnter the roof area or the eaves length and rafter length, choose the tile type and get the number of tiles, metres of battens and ridge tiles.๐Ÿ›ข๏ธDecking oil calculatorEnter the deck area, the number of coats and the coverage from the can and get the litres of decking oil and how many cans to buy.

All tools (64) โ†’