How it works
Floor area = length x width. Packs = area x (1 + waste) / m² per pack, rounded up. Use 5 to 7 % waste for straight laying in a rectangular room, 10 % for many corners, short boards or a diagonal layout, and 15 % for herringbone parquet.
Underlay is laid edge to edge over the whole floor, so we take the floor area plus 5 % for trimming. Many click vinyl floors have underlay attached, and then no extra underlay is needed. On concrete always lay a 0.2 mm PE vapour barrier with 20 cm overlaps under laminate and parquet.
Skirting = room perimeter 2 x (length + width) minus the door openings, plus 10 % for mitres and offcuts.
Results are estimates for planning. Check product data sheets, local building rules and an engineer's calculations where required.
Frequently asked questions
How much extra laminate should I buy?
Plan for 5 to 10 % extra. Rooms with alcoves, pipes and door frames need more, while one large rectangular room needs less. Unopened packs can often be returned.
Do I need underlay under vinyl flooring?
Click vinyl with integrated underlay does not need more. Vinyl without underlay needs a thin, firm underlay made for vinyl; a soft laminate underlay can make the click joints break.
How big an expansion gap should I leave?
Leave 8 to 10 mm along all walls, pipes and door frames for laminate and parquet, and follow the manufacturer for vinyl. Rooms longer than about 10 to 12 m need an expansion joint.
More tools in painting, tiles and floors
📐Room area calculatorMeasure each room once and get every area you need for a quote: floor, walls minus doors and windows, ceiling, skirting length and volume.🔲Tile calculatorEnter the area and the tile size, pick the laying pattern and get the number of tiles and boxes plus how much tile adhesive and grout to buy.🎨Paint calculatorEnter the room size or the wall area, the number of doors and windows and the coverage from the tin, and get the litres and tins you need.🧻Wallpaper calculatorEnter the total length of the walls, the room height, the roll size and the pattern repeat to see how many strips you get per roll and how many rolls to buy.📏Skirting board calculatorEnter the room perimeter, door openings and board length to get the number of skirting boards, the corner cuts and the nails or glue to fix them.🪣Self-levelling screed calculatorEnter the floor area and the average layer thickness, choose the product type and get the kilos and bags of self-levelling compound, the primer and the mixing water.🧴Sealant calculatorEnter the joint length, width and depth and see how much silicone or acrylic sealant you need and how many cartridges to buy.🧱Plaster and filler calculatorEnter the wall area and the thickness of the layer, choose plaster or filler and get the kilos and bags or buckets to buy.📐Mitre angle calculatorGet the mitre saw setting for frames and polygons, for skirting in any wall corner, and the compound mitre and bevel for crown moulding cut flat on the saw.🏠Roof tile calculatorEnter the roof area or the eaves length and rafter length, choose the tile type and get the number of tiles, metres of battens and ridge tiles.🛢️Decking oil calculatorEnter the deck area, the number of coats and the coverage from the can and get the litres of decking oil and how many cans to buy.
All tools (64) →