How it works
Litres = area / coverage of the first coat + (coats minus 1) x area / coverage of the later coats. New or weathered wood soaks up much more in the first coat, typically 6 to 10 m² per litre, while later coats reach 10 to 15 m² per litre.
Rough sawn boards use about 30 % more than planed boards, and grooved (ribbed) decking about 15 % more because the surface is larger. Remember the end grain and the sides of the boards if they are oiled before laying.
Apply in dry weather above about 10 degrees, wipe off oil that is not absorbed after 20 to 30 minutes, and never leave oily rags in a heap: they can self ignite.
Results are estimates for planning. Check product data sheets, local building rules and an engineer's calculations where required.
Frequently asked questions
How many coats of decking oil?
New wood usually gets two coats wet on wet or one day apart. Maintenance once a year is often a single coat. Follow the product, some oils want three thin coats.
How long does a litre of decking oil last?
About 8 m² on the first coat on new or dry wood and 12 m² on later coats. Hardwoods such as oak absorb less, pressure treated pine and old grey wood absorb more.
Can I oil new pressure treated wood straight away?
Wait until the wood is dry, often 4 to 8 weeks after delivery, or follow the oil makers advice. Oil on wet wood does not penetrate and can peel.
More tools in painting, tiles and floors
📐Room area calculatorMeasure each room once and get every area you need for a quote: floor, walls minus doors and windows, ceiling, skirting length and volume.🔲Tile calculatorEnter the area and the tile size, pick the laying pattern and get the number of tiles and boxes plus how much tile adhesive and grout to buy.🪵Flooring calculatorEnter the room size and the pack coverage printed on the box and get the number of packs, the underlay and the metres of skirting you need.🎨Paint calculatorEnter the room size or the wall area, the number of doors and windows and the coverage from the tin, and get the litres and tins you need.🧻Wallpaper calculatorEnter the total length of the walls, the room height, the roll size and the pattern repeat to see how many strips you get per roll and how many rolls to buy.📏Skirting board calculatorEnter the room perimeter, door openings and board length to get the number of skirting boards, the corner cuts and the nails or glue to fix them.🪣Self-levelling screed calculatorEnter the floor area and the average layer thickness, choose the product type and get the kilos and bags of self-levelling compound, the primer and the mixing water.🧴Sealant calculatorEnter the joint length, width and depth and see how much silicone or acrylic sealant you need and how many cartridges to buy.🧱Plaster and filler calculatorEnter the wall area and the thickness of the layer, choose plaster or filler and get the kilos and bags or buckets to buy.📐Mitre angle calculatorGet the mitre saw setting for frames and polygons, for skirting in any wall corner, and the compound mitre and bevel for crown moulding cut flat on the saw.🏠Roof tile calculatorEnter the roof area or the eaves length and rafter length, choose the tile type and get the number of tiles, metres of battens and ridge tiles.
All tools (64) →