Craftsman Toolbox free tools

Tile calculator

Enter the area and the tile size, pick the laying pattern and get the number of tiles and boxes plus how much tile adhesive and grout to buy.

...

How it works

Each tile covers (tile width + joint) x (tile height + joint), so the joint is counted in. Tiles = area / covered area per tile, plus waste for cuts: about 5 % for a straight pattern and 15 % for diagonal or herringbone, where far more tiles are cut at the edges.

Tile adhesive depends on the notch trowel: roughly 0.4 kg per m² per mm of notch, so a 6 mm trowel uses about 2.4 kg/m² and a 10 mm trowel about 4 kg/m². Large tiles need a larger notch and often back buttering, which adds 20 to 30 %.

Grout uses the standard formula: kg per m² = (L + W) / (L x W) x joint width x joint depth x 1.6, with tile length L, width W, joint width and depth (tile thickness) in mm. 1.6 kg/dm³ is the typical density of mixed cement grout. We add 10 % for cleaning loss.

Results are estimates for planning. Check product data sheets, local building rules and an engineer's calculations where required.

Frequently asked questions

How much extra tile should I buy?

Buy 5 % extra for a straight pattern in a simple room, 10 % for rooms with many corners and 15 % for diagonal and herringbone. Keep a few spare tiles from the same batch for later repairs.

Which notch trowel should I use?

Wall tiles up to about 20 x 20 cm: 4 to 6 mm. Floor tiles up to 30 x 30 cm: 6 to 8 mm. Larger floor tiles and 60 x 60 cm: 10 to 12 mm, with back buttering for full contact.

How wide should the grout joint be?

Wall tiles are usually set with 2 to 3 mm joints and floor tiles with 3 to 5 mm. Rectified large format tiles can go down to 2 mm, rustic tiles need wider joints.

More tools in painting, tiles and floors

📐Room area calculatorMeasure each room once and get every area you need for a quote: floor, walls minus doors and windows, ceiling, skirting length and volume.🪵Flooring calculatorEnter the room size and the pack coverage printed on the box and get the number of packs, the underlay and the metres of skirting you need.🎨Paint calculatorEnter the room size or the wall area, the number of doors and windows and the coverage from the tin, and get the litres and tins you need.🧻Wallpaper calculatorEnter the total length of the walls, the room height, the roll size and the pattern repeat to see how many strips you get per roll and how many rolls to buy.📏Skirting board calculatorEnter the room perimeter, door openings and board length to get the number of skirting boards, the corner cuts and the nails or glue to fix them.🪣Self-levelling screed calculatorEnter the floor area and the average layer thickness, choose the product type and get the kilos and bags of self-levelling compound, the primer and the mixing water.🧴Sealant calculatorEnter the joint length, width and depth and see how much silicone or acrylic sealant you need and how many cartridges to buy.🧱Plaster and filler calculatorEnter the wall area and the thickness of the layer, choose plaster or filler and get the kilos and bags or buckets to buy.📐Mitre angle calculatorGet the mitre saw setting for frames and polygons, for skirting in any wall corner, and the compound mitre and bevel for crown moulding cut flat on the saw.🏠Roof tile calculatorEnter the roof area or the eaves length and rafter length, choose the tile type and get the number of tiles, metres of battens and ridge tiles.🛢️Decking oil calculatorEnter the deck area, the number of coats and the coverage from the can and get the litres of decking oil and how many cans to buy.

All tools (64) →