Craftsman Toolbox free tools

Lighting calculator (lux and lumen)

Choose the room type, enter the floor area and the lumen of your fixture, and see how many lights it takes to get a good light level.

...

How it works

Lumen method: total lumen = lux x area / (maintenance factor x utilisation factor). Lux is light on the work surface (1 lux = 1 lumen per m²). Typical levels: hallway 100, living room 150, bathroom 200, kitchen 300, office and workshop 500, fine work 750 lux.

The maintenance factor (about 0.8) covers dust and LEDs dimming with age. The utilisation factor covers light lost on walls and ceiling: about 0.5 in small or dark rooms, 0.7 in average rooms and up to 0.8 in large, light rooms.

Fixtures needed = total lumen / lumen per fixture, rounded up. The wattage estimate assumes modern LED at about 100 lumen per watt. Spread the fixtures evenly for uniform light.

Results are estimates for planning. Check product data sheets, local building rules and an engineer's calculations where required.

Frequently asked questions

How many lumens do I need for a kitchen?

About 300 lux on the worktops, so roughly 300 lumen per m² before losses. A 10 m² kitchen needs around 5,000 to 5,500 lumen in total with typical losses.

What is the difference between lux and lumen?

Lumen is the light a lamp gives out. Lux is how much of it lands on a surface per square metre. The same lamp gives fewer lux in a bigger room.

How many lumens is a 60 W bulb?

An old 60 W incandescent gave about 800 lumen. An LED replacement gives the same with 7 to 9 W.

More tools in electrical

All tools (64) →