Craftsman Toolbox free tools

Battery runtime calculator

How long will your leisure, camper, solar or backup battery run a load? Enter the battery and the load and get the runtime in hours.

...

How it works

Stored energy (Wh) = Ah x V. Usable energy = Wh x depth of discharge. Runtime (hours) = usable Wh x inverter efficiency / load in watts.

Depth of discharge: use about 50 % for lead-acid and AGM batteries (deeper cycling shortens their life a lot) and 80 to 90 % for lithium (LiFePO4). Inverter efficiency is typically 85 to 95 %; use 100 % for DC loads connected directly.

Example: 100 Ah at 12 V is 1,200 Wh. With 80 % usable and a 90 % inverter, a 100 W load runs about 8.6 hours.

Real runtime is often lower in cold weather and at high currents (Peukert effect in lead batteries). Fuse the battery cable close to the battery: a short-circuited battery can deliver thousands of amps.

Results are estimates for planning. Check product data sheets, local building rules and an engineer's calculations where required.

Frequently asked questions

How long will a 100 Ah battery last?

At 12 V it stores 1,200 Wh. Running 100 W through an inverter, expect about 5 hours from lead-acid (50 % usable) and about 8 to 9 hours from lithium.

How do I connect batteries for more runtime?

In parallel, Ah adds up and voltage stays the same. In series, voltage adds up and Ah stays the same. Either way the Wh is the sum of the batteries.

Why does the battery current matter?

A 1,000 W load on a 12 V battery draws over 90 A. That needs thick cables, a proper fuse, and a battery rated for that discharge rate.

More tools in electrical

All tools (64) โ†’