Craftsman Toolbox free tools

Steel weight calculator

Pick the profile and material, enter the dimensions in mm and the length, and get the weight for ordering, lifting or transport.

...

How it works

Weight per metre = cross-section area (mm²) x density / 1,000,000. Steel weighs 7,850 kg/m³, stainless about 8,000 and aluminium 2,700.

Flat bar = width x thickness. Round bar = pi x d² / 4. Square tube = side² - (side - 2 x wall)². Round tube = pi / 4 x (D² - (D - 2 x wall)²).

Plate weight = width x length x thickness x density. 1 mm steel plate weighs 7.85 kg per m². Real profiles have rounded corners, so tubes can be a few percent lighter than calculated.

Results are estimates for planning. Check product data sheets, local building rules and an engineer's calculations where required.

Frequently asked questions

How much does steel weigh per cubic metre?

Mild steel weighs about 7,850 kg/m³. Stainless is a little heavier at about 8,000, and aluminium about one third at 2,700.

Why does the supplier's table differ slightly?

Tables use the real profile with rounded corners and rolling tolerances. Our figures are a good estimate for planning, transport and lifting.

More tools in everyday helpers

All tools (64) →