How it works
The page reads your phone's motion sensor (device orientation). Slope in % = tan(angle) x 100 and mm per metre = tan(angle) x 1000.
Phone sensors are good to about 0.1 to 0.5 degrees. For best accuracy calibrate on a surface you know is level, and check by turning the phone 180 degrees: the reading should be the same. For setting out real work use a proper level or a laser.
Results are estimates for planning. Check product data sheets, local building rules and an engineer's calculations where required.
Frequently asked questions
Why does nothing happen on my iPhone?
Tap Start level and allow motion access. iOS asks for permission once per site.
Does it work on a computer?
Laptops and desktops usually have no motion sensor, so open the page on a phone or tablet.