Craftsman Toolbox free tools

Circle and arc calculator

Get circumference and area of a circle, or use arc mode to set out an arch, a curved wall or a round bed from its width and height.

...

How it works

Circle: circumference = pi x diameter, area = pi x radius². Pi is about 3.1416.

Arc: measure the straight width (chord c) and the height of the curve at the middle (rise h). Radius = (c² / 4 + h²) / (2 x h).

Arc angle = 2 x asin(c / (2 x radius)), and arc length = radius x angle in radians. Tie a string to a peg at the radius distance to draw the curve on site.

Results are estimates for planning. Check product data sheets, local building rules and an engineer's calculations where required.

Frequently asked questions

How do I set out an arch over a door?

Enter the opening width as chord and the arch height as rise. Place a centre point at the radius below the top of the arch, on the centre line, and swing the curve with a string or trammel.

How long a piece of material do I need for a curve?

Use the arc length, and add extra for cutting and joints. Flexible plywood or bendable track is sold by length.

More tools in everyday helpers

All tools (64) →