How it works
Sections = fence length / post spacing, rounded up, and posts = sections + 1. Rails = sections x rails per section, each as long as the post spacing.
Boards: either a fixed number per section, or fence length / (board width + gap) rounded up. Screws or nails = 2 per board at every rail.
Post holes are dug to about one third of the fence height (at least 600 mm). Concrete per hole = pi x (hole diameter / 2)² x depth minus the 100 x 100 mm post, and a 25 kg bag gives about 0.011 m³.
Results are estimates for planning. Check product data sheets, local building rules and an engineer's calculations where required.
Frequently asked questions
How far apart should fence posts be?
1.8 to 2.4 metres is normal for wooden fences. Use shorter spacing in windy places, for tall solid fences and when the boards are heavy.
How deep should fence posts go?
About one third of the height above ground, and at least 600 mm. A 1.8 m fence needs about 600 mm in the ground, deeper in loose or sandy soil.
How many rails does a fence need?
Two rails for fences up to about 1.2 m, and three rails for 1.5 to 2 m high fences so the boards do not warp.