Craftsman Toolbox free tools

Excavation calculator

Enter the size of your trench or pit and get the volume in the ground, the loose volume once dug up, its weight and the truck loads needed.

...

How it works

Solid volume = length x width x depth for a trench or rectangular pit, or pi x radius² x depth for a round hole, times the number of holes.

Dug soil takes more space than soil in the ground. Loose volume = solid volume x (1 + bulking factor). Sand bulks about 10 to 15 %, normal soil 20 to 30 % and clay 30 to 40 %.

Weight uses about 1.8 tonnes per m³ of soil in the ground. Truck loads = loose volume / truck capacity, rounded up.

Results are estimates for planning. Check product data sheets, local building rules and an engineer's calculations where required.

Frequently asked questions

What is the bulking factor of soil?

It is how much bigger soil gets when dug up. Use about 25 % for ordinary soil, 15 % for sand and up to 40 % for heavy clay or rock.

How much soil fits in a truck?

A small tipper takes 3 to 5 m³, a normal three axle truck about 10 m³ and a large truck with trailer 15 to 20 m³. Weight limits can apply before the box is full.

Do trenches need shoring?

Trenches deeper than about 1.2 to 1.5 metres need sloped sides or shoring for safety. Follow the workplace safety rules in your country.

More tools in groundwork and landscaping

All tools (64) →